Note: Our video surveillance management software platform SVMSPro has already integrated Hikvision EHOME/ISUP proprietary protocol, thus makes it easily to manage Hikvision front-end devices easily by EHOME/ISUP protocol via LAN, WAN, VPN, 4G/5G network.
When access to Hikvison NAT video devices (such as IP cameras, NVRs) by using Hikvision Ehome/ISUP protocol, front-end Hikvision NAT video devices do not need to provide fixed IP address or map the ports.
Procedure
Step 1:Open Hikvision network camera web browser by inputting camera IP address on the WEB browser. Login by its account and password. Go to Configuration > Network > Advance Settings > Platform Access.
Step 2: Selec Ehome or ISUP protocol as the platform access mode. Then select Enable.
Step 3: Select a Ehome/ISUP protocol version, and input SVMSPro platform WAN IP address. If managing cameras in LAN, please input SVMSPro platform LAN IP address LAN IP address 7660. Then click Save on this Platform Access configuration page of Hikvision network camera.
Note: When select protocol version ISUP5.0, please input passwords: a12345678.
Hikvision Camera Configuration
Step 4: Map the SVMSPro Server network ports 7660 (UDP+TCP), 53404(TCP), 53403(TCP) and 54000-55000 (UDP+TCP) .
Step 5: Login to the SVMSPro Client. On the Control Panel page, click Device Management to enter device management interface.
Step 6: Click NAT Device, this registered Hikvision network camera will be listed.
Step 7: Select one area, then select the device. Click button Add To Management to add device.
Adding Hikvision NAT video device